Diamond honing file Honing rod (Rod diameter: Ø4.6-6.0mm)
Diamond material has extremely high wear resistance, resulting in a long service life for the honing rod and reduced replacement frequency.
Application Areas:
- Suitable for internal hole polishing, trimming, piercing, internal hole processing, or other precision grinding needs in metalworking.
- Suitable for hard materials such as ceramics, glass, cemented carbide, and stone.
- Can be used for reaming drawing dies, screw dies, etc.
Product Specifications
※The dotted areas in the drawing indicate where the abrasive is attached.
※All honing rods have a back taper (ØA) of -0.15 mm at the front end.
Unit: mm
| ØA
O.D |
ØB
Shank |
Slope length L2 | T | L | Grit number |
| 4.6 | 4.20 | 90 | 120 | 200 | D150 |
| 4.7 | 4.30 | 90 | 120 | 200 | D150 |
| 4.8 | 4.40 | 90 | 120 | 200 | D150 |
| 4.9 | 4.50 | 90 | 120 | 200 | D150 |
| 5.0 | 4.60 | 90 | 120 | 200 | D150 |
| 5.1 | 4.70 | 90 | 120 | 200 | D150 |
| 5.2 | 4.80 | 90 | 120 | 200 | D150 |
| 5.3 | 4.90 | 90 | 120 | 200 | D150 |
| 5.4 | 5.00 | 90 | 120 | 200 | D150 |
| 5.5 | 5.10 | 90 | 120 | 200 | D150 |
| 5.6 | 5.20 | 90 | 120 | 200 | D150 |
| 5.7 | 5.30 | 90 | 120 | 200 | D150 |
| 5.8 | 5.40 | 90 | 120 | 200 | D150 |
| 5.9 | 5.50 | 90 | 120 | 200 | D150 |
| 6.0 | 5.60 | 90 | 120 | 200 | D150 |
Any question? Contact Honway
