Diamond honing file Honing rod (Rod diameter: Ø8.1-9.0mm)
Diamond material has extremely high wear resistance, resulting in a long service life for the honing rod and reduced replacement frequency.
Application Areas:
- Suitable for internal hole polishing, trimming, piercing, internal hole processing, or other precision grinding needs in metalworking.
- Suitable for hard materials such as ceramics, glass, cemented carbide, and stone.
- Can be used for reaming drawing dies, screw dies, etc.
Product Specifications
※The dotted areas in the drawing indicate where the abrasive is attached.
※All honing rods have a back taper (ØA) of -0.15 mm at the front end.
Unit: mm
ØA
O.D |
ØB
Shank |
Slope length L2 | T | L | Grit number |
8.1 | 7.80 | 80 | 120 | 250 | D150 |
8.2 | 7.90 | 80 | 120 | 250 | D150 |
8.3 | 8.00 | 80 | 120 | 250 | D150 |
8.4 | 8.10 | 80 | 120 | 250 | D150 |
8.5 | 8.20 | 80 | 120 | 250 | D150 |
8.6 | 8.30 | 80 | 120 | 250 | D150 |
8.7 | 8.40 | 80 | 120 | 250 | D150 |
8.8 | 8.50 | 80 | 120 | 250 | D150 |
8.9 | 8.60 | 80 | 120 | 250 | D150 |
9.0 | 8.70 | 80 | 120 | 250 | D150 |
Any question? Contact Honway