Diamond honing file Honing rod (Rod diameter: Ø7.1-8.0mm)
Diamond material has extremely high wear resistance, resulting in a long service life for the honing rod and reduced replacement frequency.
Application Areas:
- Suitable for internal hole polishing, trimming, piercing, internal hole processing, or other precision grinding needs in metalworking.
- Suitable for hard materials such as ceramics, glass, cemented carbide, and stone.
- Can be used for reaming drawing dies, screw dies, etc.
Product Specifications
※The dotted areas in the drawing indicate where the abrasive is attached.
※All honing rods have a back taper (ØA) of -0.15 mm at the front end.
Unit: mm
ØA
O.D |
ØB
Shank |
Slope length L2 | T | L | Grit number |
7.1 | 6.80 | 80 | 120 | 250 | D150 |
7.2 | 6.90 | 80 | 120 | 250 | D150 |
7.3 | 7.00 | 80 | 120 | 250 | D150 |
7.4 | 7.10 | 80 | 120 | 250 | D150 |
7.5 | 7.20 | 80 | 120 | 250 | D150 |
7.6 | 7.30 | 80 | 120 | 250 | D150 |
7.7 | 7.40 | 80 | 120 | 250 | D150 |
7.8 | 7.50 | 80 | 120 | 250 | D150 |
7.9 | 7.60 | 80 | 120 | 250 | D150 |
8.0 | 7.70 | 80 | 120 | 250 | D150 |
Any question? Contact Honway