Diamond honing file Honing rod (Rod diameter: Ø6.1-7.0mm)
Diamond material has extremely high wear resistance, resulting in a long service life for the honing rod and reduced replacement frequency.
Application Areas:
- Suitable for internal hole polishing, trimming, piercing, internal hole processing, or other precision grinding needs in metalworking.
- Suitable for hard materials such as ceramics, glass, cemented carbide, and stone.
- Can be used for reaming drawing dies, screw dies, etc.
Product Specifications
※The dotted areas in the drawing indicate where the abrasive is attached.
※All honing rods have a back taper (ØA) of -0.15 mm at the front end.
Unit: mm
ØA
O.D |
ØB
Shank |
Slope length L2 | T | L | Grit number |
6.1 | 5.80 | 90 | 120 | 200 | D150 |
6.2 | 5.90 | 90 | 120 | 200 | D150 |
6.3 | 6.00 | 90 | 120 | 200 | D150 |
6.4 | 6.10 | 90 | 120 | 200 | D150 |
6.5 | 6.20 | 90 | 120 | 200 | D150 |
6.6 | 6.30 | 90 | 120 | 200 | D150 |
6.7 | 6.40 | 90 | 120 | 200 | D150 |
6.8 | 6.50 | 90 | 120 | 200 | D150 |
6.9 | 6.60 | 90 | 120 | 200 | D150 |
7.0 | 6.70 | 90 | 120 | 200 | D150 |
Any question? Contact Honway