Diamond honing file Honing rod (Rod diameter: Ø1.5-4.5mm)
Diamond material has extremely high wear resistance, resulting in a long service life for the honing rod and reduced replacement frequency.
Application Areas:
- Suitable for internal hole polishing, trimming, piercing, internal hole processing, or other precision grinding needs in metalworking.
- Suitable for hard materials such as ceramics, glass, cemented carbide, and stone.
- Can be used for reaming drawing dies, screw dies, etc.
Product Specifications
※The dotted areas in the drawing indicate where the abrasive is attached.
※All honing rods have a back taper (ØA) of -0.15 mm at the front end.
Unit: mm
ØA
O.D |
ØB
Shank |
Slope length L2 | T | L | Grit number |
1.5 | 1.20 | 90 | 120 | 200 | D150 |
1.6 | 1.30 | 90 | 120 | 200 | D150 |
1.7 | 1.40 | 90 | 120 | 200 | D150 |
1.8 | 1.50 | 90 | 120 | 200 | D150 |
1.9 | 1.60 | 90 | 120 | 200 | D150 |
2.0 | 1.70 | 90 | 120 | 200 | D150 |
2.1 | 1.80 | 90 | 120 | 200 | D150 |
2.2 | 1.90 | 90 | 120 | 200 | D150 |
2.3 | 2.00 | 90 | 120 | 200 | D150 |
2.4 | 2.10 | 90 | 120 | 200 | D150 |
2.5 | 2.20 | 90 | 120 | 200 | D150 |
2.6 | 2.30 | 90 | 120 | 200 | D150 |
2.7 | 2.40 | 90 | 120 | 200 | D150 |
2.8 | 2.50 | 90 | 120 | 200 | D150 |
2.9 | 2.60 | 90 | 120 | 200 | D150 |
3.0 | 2.70 | 90 | 120 | 200 | D150 |
3.1 | 2.80 | 90 | 120 | 200 | D150 |
3.2 | 2.90 | 90 | 120 | 200 | D150 |
3.3 | 3.00 | 90 | 120 | 200 | D150 |
3.4 | 3.10 | 90 | 120 | 200 | D150 |
3.5 | 3.20 | 90 | 120 | 200 | D150 |
3.6 | 3.30 | 90 | 120 | 200 | D150 |
3.7 | 3.40 | 90 | 120 | 200 | D150 |
3.8 | 3.50 | 90 | 120 | 200 | D150 |
3.9 | 3.60 | 90 | 120 | 200 | D150 |
4.0 | 3.70 | 90 | 120 | 200 | D150 |
4.1 | 3.70 | 90 | 120 | 200 | D150 |
4.2 | 3.80 | 90 | 120 | 200 | D150 |
4.3 | 3.90 | 90 | 120 | 200 | D150 |
4.4 | 4.00 | 90 | 120 | 200 | D150 |
4.5 | 4.10 | 90 | 120 | 200 | D150 |
Any question? Contact Honway