
ダイヤモンド工具/研削・研磨/
特殊材料・研削盤設備
ホンウェイ工業株式会社
HonWay Materials
Showing 1–12 of 295 results
単結晶ダイヤモンドパウダー (高温高圧)
NT$180 – NT$250
Select options
This product has multiple variants. The options may be chosen on the product page
ナノダイヤモンド研磨液
NT$1500 – NT$2000
Select options
This product has multiple variants. The options may be chosen on the product page
スーパーファイバーオイルストーン
NT$220 – NT$485
Select options
This product has multiple variants. The options may be chosen on the product page
ウールホイール(シャンク径:Ø3.0mm)
NT$35 – NT$55
Select options
This product has multiple variants. The options may be chosen on the product page
ハンドル付き砥石
NT$40
Select options
This product has multiple variants. The options may be chosen on the product page
3mmダイヤモンド・スモール・ブラシ
NT$500
Select options
This product has multiple variants. The options may be chosen on the product page
ミニファイバーオイルストーン
NT$270 – NT$930
Select options
This product has multiple variants. The options may be chosen on the product page
多結晶ダイヤモンドパウダー(単結晶エッチング)
NT$350 – NT$450
Select options
This product has multiple variants. The options may be chosen on the product page
単結晶ダイヤモンドペースト(一般用)
NT$450 – NT$1250
Select options
This product has multiple variants. The options may be chosen on the product page
IF-50 鉄工用ダイヤモンドヤスリ
NT$310
Select options
This product has multiple variants. The options may be chosen on the product page
その他のウール製品
NT$18 – NT$270
Select options
This product has multiple variants. The options may be chosen on the product page
US-70 左右トラバース空気圧ヤスリ ストローク 吸気圧 重量 サイズ 0.7mm 90psi (6.2kg/cm2) 305g Ø28x205L (mm) 一般的な組み立て方法 空気圧工具の性能を最大限に引き出し、寿命を延ばすには、水を濾過し、吸入圧を調整し、潤滑するための3点を接続する必要がある。 性能と耐用年数を向上させるための要件
MTF シリーズ ダイヤモンドマシン平ヤスリと角ヤスリ 単位 : mm 全長 ダイヤモンドの長さ 形状 粒度 コード 72 15 #200
コーントリマー コーントリマーは、ダイヤモンドの高い硬度を利用し、一般的な炭化ケイ素や酸化アルミニウムの砥石などの一般的な研ぎ、ドレッシング、成形、シンニングに使用されます。 ダイヤモンドアングル (V°) ダイヤモンド端の曲率 (R) ダイヤモンドの原材料 コード 60° 0.02~0.03R Ø1/8”x1”L DC600 60° 0.02~0.03R
Lutetium Chloride hexahydrate 塩化ルテチウム LuCl₃·6H₂O 詳しくはこちらまでお問い合わせください。 純度 外観 用途 TREO その他の本質 CAS# 純度 Purity:99.99% 外観