High efficiency polycrystalline diamond compound (for mold steel)

High efficiency polycrystalline diamond compound (for mold steel)

Diamond Compound is a commonly used polishing agent and can give the best results if used properly

Tools for polishing, from different types of fibers to sticky pads, are available in different hardnesses. Such as nylon, paper, velvet, cotton and so on.

Be careful when polishing:

1. Polishing should be done in a dust-free, well-ventilated area, as hard dust particles tend to adhere to the diamond compound and damage the polished surface.
2. Each polishing tool should be used for only one type of diamond compound and protected from dust.
3. Wash your hands and the workpiece each time you change the diamond compound .
4. Adjust the polishing pressure to the hardness of the polishing tool and the grain size of the diamond compound ; for the finest diamond compound , a pressure as large as the weight of the polishing tool is sufficient.
5. Polishing should start from the corners, edges, pieces or other parts of the mold.

Any questions? Contact HonWay